Technical Specifications; General Power Tool Safety Warnings - SPARKY Professional TKN 80D Instrucciones De Uso

II - Technical specifications
Model:
▪ Power input
▪ No load speed
▪ Blade diameter
▪ Blade bore
▪ Blade teeth
▪ Maximum cutting capacity
▪ Blade kerf
▪ Minimum blade thickness
▪ Maximum blade thickness
▪ Cutting capacities:
- Straight cut at 0° x 0°
- Mitre cut at 45° (R) x 0°
- Mitre cut at 52° (R) x 0°
- Mitre cut at 45° (L) x 0°
- Mitre cut at 52° (L) x 0°
- Bevel cut at 0° x 45° (R)
- Bevel cut at 0° x 45° (L)
- Compound mitre cut at 45° (R) x 45° (R)
- Compound mitre cut at 52° (R) x 45° (R)
- Compound mitre cut at 45° (L) x 45° (L)
- Compound mitre cut at 52° (L) x 45° (L)
▪ Weight (EPTA procedure 01/2003):
▪ Protection class (EN 61029-1)
▪ Noise and vibration information
A-weighted sound pressure level L
A-weighted sound power level L
Typical weighted vibration
Dust from material such as paint containing lead, some wood species, minerals and metal may be harmful. Contact
with or inhalation of the dust may cause allergic reactions and/or respiratory diseases to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic such as oak and beech dust especially in conjunction with additives
for wood conditioning (chromate, wood preservative). Material containing asbestos must only be treated by specialists.
▪ Where the use of a dust extraction device is possible it shall be used.
▪ To achieve a high level of dust collection, use vacuum cleaner for wood or for wood and/or minerals together with
this tool.
▪ The work place must be well ventilated.
▪ The use of a dust mask of filter class P2 is recommended.
Follow national requirements for the materials you want to work with.
III - General power tool
safety warnings
WARNING! Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1. WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
Original instructions
pages-TKN-80-95D-2012.indd 3
:
pA
wA
reference.
TKN 80D
1800 W
5000 min
-1
250 mm
30 mm
24 TCT
80 mm
2.8
1.85 mm
2.8 mm
280 x 80 mm
196 x 80 mm
170 x 80 mm
196 x 80 mm
170 x 80 mm
280 x 25 mm
280 x 45 mm
196 x 25 mm
170 x 25 mm
196 x 45 mm
170 x 45 mm
21.5 kg
II
98 dB(A)
112 dB(A)
7.14 m/s
2
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c) Keep children and bystanders away while op-
erating a power tool. Distractions can cause you
to lose control.
2. ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
TKN 95D
1800 W
5000 min
-1
305 mm
30 mm
32 TCT
95 mm
3.0 mm
2.0
3.0
305 x 95 mm
215 x 95 mm
186 x 95 mm
215 x 95 mm
186 x 95 mm
305 x 42 mm
305 x 52 mm
215 x 42 mm
186 x 42 mm
215 x 52 mm
186 x 52 mm
25.2 kg
II
98 dB(A)
111 dB(A)
7.14 m/s
2
3
EN
4.7.2012 . 11:15:14 .