Publicidad
Idiomas disponibles
Idiomas disponibles
GB
Installing front panel
11
8
• The front panel 8 is adjusted with the two raised-head screws 9 on the
middle transverse tube 11, and fixed with a screw 12. If necessary, secure
the bed frame and the front panel at the top with a G-clamp and check
the front-panel gap, see Fig. 14.
7
12
10
9
- 20 -
Assembly instructions
Fig. 13
6 Front panel
brackets
7 Middle and lower
transverse tubes
6
• Hang prepared front
panel with front-panel
brackets 6 on the
transverse tubes 7 on
the bed frame, see
Fig. 13.
Fig. 14
8 Front panel
9 Raised-head
screws M4 x 10 mm
10 Front-panel
brackets
11 Middle transverse
tube
12 Hospa pan-head
screws
4,5 x 30 mm
Publicidad
