Hdmi Mode - FUTURO AUTOFOCUS Manual De Instrucciones

10
3. Quick start guide for the camera
Before switching on the camera, please connect the standard C-mount camera to the camera adapter
and connect this to the third microscope tube, which transfers the median image of the microscope
object to the camera sensor.
3.1 WLAN mode
1. Plug the 12V/1A
power supply. The
2. Press the ON/OFF button  to switch on the camera. The
3. Insert the WLAN antenna included in the scope of delivery into the
 to generate the
4. As soon as the indicator on the
or smartphone) to the
The password
5. Open the software and start by clicking the name of the camera model in the camera list.

3.2 HDMI mode

1. Connect the HDMI cable to the
2. Connect a USB mouse to the
software;
3. Plug the 12 V/1 A
power supply. The
4. Insert the SD card into the
5. Press the
6. Move the mouse pointer to the left side of the video window. The
displayed. The control panel provides the functions
sharpness, noise
7. When you move the mouse pointer to the top of the video window, a
with calibration and other measurement tools is displayed. For further information, see 3.3.3.
The measurement data can be exported as a
8. When you move the mouse pointer to the bottom edge of the video window, a
toolbar is displayed. This enables operations such as
ges, crosshairs, WDR
9. When you move the mouse pointer to the bottom edge of the video window, the
trol toolbar
appears, which allows you to perform autofocus operations; 3.3.4 and 3.3.5
power cable into the
LED display  then lights up red;
WLAN signal;
WLAN
WLAN signal, the name of which begins with BHDC-AFC202M.
is 12345678;
HDMI port
USB port
power unit into the
LED display  then lights up red;
SD card slot
ON/OFF button  to switch on the camera. The
reduction, etc. For details, see 3.3.1
etc. to be performed. For more information, see 3.3.2
opens automatically. When you click the button AF, the
power supply interface  to connect the camera to the
LED display
antenna begins to flash, connect the computer (or an iPad
 to connect the camera to the HDMI display;
 to control the camera with the integrated
power supply interface  to connect the camera to the
 to save captured images and recorded videos;
LED display
manual / automatic exposure, white balance,
*.CSV file.
zooming in, zooming out, flipping, still ima-
 then lights up blue;
WLAN ANTENNA/USB PORT
XCamView
 then lights up blue;
camera control panel is then
measurement toolbar
camera control
camera con-
autofocus control panel