3
Insert the screwdriver between the handle and the internal frame.
Tilt the screwdriver to loosen the handle (Fig. 16).
4
Remove the internal frame from the handle. (Fig. 17)
5
Remove the rubbers that are on top and below the battery (Fig. 18).
6
Insert the screwdriver between the battery and the frame.
Tilt the screwdriver to pop the battery out of the frame (Fig. 19).
7
Place some tape over the ends of the battery to avoid any
short-circuiting due to residual energy in the battery (Fig. 20).
The rechargeable battery can now be recycled or disposed of and
the rest of the product discarded appropriately.
Guarantee and support
If you need information or support, please visit www.philips.com/
support or read the separate worldwide guarantee leaflet.
Guarantee restrictions
The terms of the international guarantee do not cover the following:
-
Brush heads.
-
Damage caused by use of unauthorised replacement parts.
-
Damage caused by misuse, abuse, neglect, alterations or
unauthorised repair.
-
Normal wear and tear, including chips, scratches, abrasions,
discolouration or fading.
ENGLISH
15