V-Corner Back To Back; Fitting The Loudspeaker - Monitor Audio VECTA V240 Manual De Instrucciones

V-CORNER Back to back

It is possible to mount a pair of V240's next to each other using
2 corner brackets. This will give almost 180 degrees of sound
dispersion. If mounting them in this configuration, fix one side of the
first bracket to the wall. Align the second bracket to the first and
mark its fixing points. It might be beneficial to hold them together
with a small nut and bolt or cable tie (neither supplied). once fixing
points have been drilled, use the appropriate fixings and secure the
second bracket to the wall.

Fitting the Loudspeaker

Once the correct bracket has been fitted, the loudspeaker can then be mounted onto it.
Attaching it is simple, just align the bracket arm with the mounting location on the loudspeaker and slot it
into place. Once in place, the loudspeaker fixing bolt must be tightened to hold the loudspeaker securely
in place. There is a small recess in the back of the loudspeaker to align the screwdriver with the bolt.
The same method of fixing applies to all brackets.
Screwdriver Guide
This is to aid installation
and guide the screwdriver
to the fixing screw.
monitoraudio.com 5