Quick Start Instructions; Operation Of This Scale; Auto Off Function - Welch Allyn Health o Meter Professional 522KLWA Instrucciones De Uso

QUICK START / OPERATING INSTRUCTIONS

QUICK START INSTRUCTIONS

1. Press the ON/OFF button to turn the scale on. "START" will appear on the display for 4-5 seconds, then "0.0" will be displayed.
2. Place the infant on the scale. After the weight has stabilized, "LOCK" and the patient's weight will be displayed.
3. The stable weight will continue to be displayed until the infant is taken off the scale. The display will again show "0.0".
DESCRIPTION FUNCTION
ON/OFF Turns the scale ON and OFF.
Holds the value of the weighed object on the display until the
HOLD/RELEASE
button is pressed again.
ZERO Zeros the display prior to weighing; enables the cancellation
of weight if some object was placed on the scale. Can be
used if you want to tare that object.
LB/KG Toggles between kilogram or pound uses of the scale.
OPERATING INSTRUCTIONS

AUTO OFF FUNCTION

As an energy saving feature, the scale will automatically turn off after 2 minutes of inactivity, if this function is enabled.
Activating auto-off
1. While the scale is turned off, press and hold the "HOLD/RELEASE" button.
2. While holding the "HOLD/RELEASE" button, press the "ON/OFF" button to turn the scale on.
3. "START" will briefly appear on the display followed by "AOF=1".
4. Auto off is now enabled.
De-activating auto-off
1. While the scale is turned off, press and hold the "HOLD/RELEASE" button.
2. While holding the "HOLD/RELEASE" button, press the "ON/OFF" button to turn the scale on.
3. "START" will briefly appear on the display followed by "AOF=0".
4. Auto off is now disabled and the scale will remain on until the scale is manually turned off.
KG & LB LOCK OUT
The default weighing mode for this scale can be changed from KG/LB to KG only or LB only.
To change weighing mode:
1. Press the ON/OFF button to turn the scale on.
2. Wait for "0.0" to appear on the display.
3. Press and hold the LB/KG button until the unit of measure begins to flash.
4. Release the LB/KG button and the scale will operate in the mode you selected.
5. Repeat steps 3-4 to change the weighing mode to a different unit of measure as the default for use.
HOLD / RELEASE FUNCTION
1. Complete steps 1 and 2 of the Quick Start Operating Instructions, then do the following steps.
2. While the infant is on the scale, press the HOLD/RELEASE button to activate the hold function. The stable weight will remain on
display for your convenience until the hold function is cancelled.
3. To cancel hold function, press the HOLD/RELEASE button again. The scale will return to normal weighing operation.
6
522KLWA