Displaying Station Information - OK. OWR 300-B Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 24

Displaying station information

Select a DAB station. During DAB/DAB+ radio playback, press INFO repeatedly to display the following
information (if available):
1. Channel and frequency
2. Bit rate and audio status (Mono/Stereo)
3. Ensemble name (e.g. DAB+)
4. Signal strength
5. Time and date
6. Dynamic Label Segment (DLS)
7. Program type (PTY)
8. Station name
Storing DAB stations
You can store up to 10 pre-set DAB/DAB+ stations.
8
1. Select a DAB station.
2. Push PRESET button for at least 1 second . Within 3 seconds chose the preset with TUNE+/–
buttons and push ENTER to save the station to the desired preset.
3. The pre-set number of the stored station is displayed.
4. Repeat steps 1 and 2 to store more DAB/DAB+ stations.
Selecting pre-set DAB stations
1. Press MODE to select the DAB/DAB+ radio.
9
2. Press PRESET to access the preset menu.
3. Press TUNE+/– buttons to navigate through the preset DAB/DAB+ stations.
FM-Radio
Selecting FM stations
10 Press MODE to select FM radio. The radio plays the last station selected.
Selecting FM station frequencies
11 1. Select a FM station.
2. Manual frequency selection
Push TUNE+/- buttons to change the frequency in 0.05 MHz steps. Keep the TUNE+/– buttons
pushed to set a frequency quickly.
3. Automatic frequency selection
Push the SCAN button to start the channel search. The radio stops if an radio signal is received.
4. Push the SCAN button to scan forward FM frequency,press and hold the SCAN button to scan
backward FM frequency.
Storing FM stations
12 You can store up to 10 pre-set FM stations.
1. Select the desired FM station.
2. Push PRESET button for at least 1 second. Within 3 seconds chose the preset with TUNE+/–
buttons and push ENTER to save the station to the desired preset.
3. The pre-set number of the stored station is displayed.
4. Repeat steps 1 and 2 to store more FM stations.
Selecting a pre-set FM station
13 1. Press MODE to select the FM radio.
2. Press PRESET to access the Preset menu.
3. Press TUNE+/– buttons to navigate through the preset FM stations.
IM_OWR300-B_150129_V03_HR.indb 21
21
eN
30/1/15 10:52 AM

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Owr 300-wOwr 300-r

Tabla de contenido