OK. ORD 300 Manual De Instrucciones página 17

DISPLAYING STATION INFORMATION
1. Select a DAB station.
2. During DAB/DAB+ radio playback, press INFO repeatedly to display the following
information (if available):
• Ensemble
• Frequency
• Signal frequency error
• Audio state and bit rate
• Time
• Date
• Radio text
• Signal strength
• Programme type
• Power status (Mains or battery)
MANUAL STORING DAB STATIONS
You can store up to 20 preset DAB/DAB+ stations.
1. Select the desired station.
2. Press and hold PRESET for one second and then confirm by pushing ENTER so that
<Preset 1 stored> appears on the display.
3. Repeat steps 1 to 2 to store more DAB/DAB+ stations.
Note: If there is already an existing DAB station stored under a preset, it will be over
written when you store the new station.
SELECTING PRESET DAB STATIONS
Press SOURCE to select the DAB/DAB+ mode.
1.
2. Press PRESET to access the Preset menu "Preset Recall" <#: stored station name>.
3. Use the buttons + or – to select a preset number and confirm your selection by
pressing ENTER.
USING THE DAB/DAB+ MENUS
In DAB mode press and hold MENU and use the buttons + or – to browse the menu
options. To confirm your selection press ENTER every time.
• <Alarms>
• <Station scan>
• <System>
FM RADIO
Selecting FM Stations
Press the SOURCE button to select FM stations.
Fig. 4 1.
2. The radio plays the last station selected.
Selecting FM station frequencies
1. Select a FM station.
2. Manual frequency selection
Press the buttons + or – to change the frequency at intervals of 0.05 MHz.
3. When pressing the SCAN button, the unit will quick search and play the next
received available station.
IM_ORD300_A5_201202_V04_HR.indb 17 IM_ORD300_A5_201202_V04_HR.indb 17
17
EN
2/12/2020 2:21 PM 2/12/2020 2:21 PM