Tabla De Contenido; General Information - Hilti DAG 500-D Manual De Instrucciones

ORIGINAL OPERATING INSTRUCTIONS
DAG 500 D angle grinder
It is essential that the operating instruc-
tions are read before the power tool is op-
erated for the first time.
Always keep these operating instructions
together with the power tool.
Ensure that the operating instructions are
with the power tool when it is given to
other persons.
Contents
1. General information
2. Description
3. Technical data
4. Safety instructions
5. Before use
6. Operation
7. Care and maintenance
8. Insert tools, accessories
9. Troubleshooting
10. Disposal
11. Manufacturer's warranty - tools

1. General information

1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that could lead
to serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation
that could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation
that could lead to slight personal injury or damage to
the equipment or other property.
Printed: 07.07.2013 | Doc-Nr: PUB / 5069466 / 000 / 00
1 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out
cover pages. Keep these pages open while studying
the operating instructions.
In these operating instructions, the designation "the
power tool" always refers to the DAG 500-D angle
grinder.
Operating controls and components 1
@
Ventilation slots
;
Hold-to-run switch
=
Side handle
%
Page
Spindle lockbutton
&
1
Guard release button
(
2
Spindle
)
4
Guard
+
4
Clamping flange
§
9
Cutting disc / grinding disc (not supplied)
/
10
Clamping nuts
:
11
Wrench
·
12
Safety release
12
13
13
NOTE
Draws attention to an instruction or other useful
information.
1.2 Explanation of the pictograms and other
information
Warning signs
General
warning
Warning: Warning: hot
electricity surface
en
1