NORAUTO 2168677 Manual De Instrucciones página 52

ASSEMBLY
Use the exploded drawing as your guide to assembly. Lay all parts and assemblies out in front of you before
beginning. The following procedure is recommended:
All numbers in parenthesis () refer to the index number from the parts breakdown.
1. Familiarize yourself with Engine Stand.
2. Attach wheel (11) to rear support axle (10) with
washer (12), and cotter pin (13).
3. Attach caster (18) to front leg (17) with washer
(4), spring washer (7) and nut (8).
6. Attach head assembly (5) to mounting arms (6) with bolt (3), washer (4), spring washer (7) and nut (8).
4. Attach crossbeam (15) to the front leg (17) with
bolt (16), washer (4), spring washer (7) and nut
(8).
5. Attach crossbeam (15) to the main post (9)
connecting rear support axle (10) with bolt (14)
and spring washer (7).
52