Maintenance Instructions - NORAUTO 2168677 Manual De Instrucciones

3. Make sure the engine is centered and level on the head plate assembly, then tighten the mounting arms to
the engine first, and then tighten the mounting arms to the head assembly.
4. Check and verify that all attaching hardware on the engine, mounting plate assembly and mounting are
tight. After engine is secure SLOWLY lower the hoist transferring load to the engine stand.

MAINTENANCE INSTRUCTIONS

• Maintain your equipment. It is recommended that the general condition of any equipment be examined
before it is used. Keep your equipment in good repair by adopting a program of conscientious repair and
maintenance. Have necessary repairs made by qualified service personnel.
• Follow the maintenance instructions carefully to keep your equipment in good working condition. Never
perform any maintenance on the equipment while it is under a load.
a. All moving parts of the equipment should be regularly cleaned.
b. Lubricate parts as required by the manufacturer's specifications.
c. If additional maintenance is required, it should be completed in accordance with the instructions of the
manufacturer or qualified person.
Note: If the equipment is stored outdoors, be sure to lubricate all parts before and after use to ensure the
equipment stays in good working condition.
54