Usage; Cleaning And Maintenance; Accessories And Replacement Parts - Beurer MP 59 Instrucciones De Uso

Note
• The portable pedicure device can be used on dry or wet skin.
• When used on dry skin, the skin must be completely dry and free from grease.
• Do not use any cream before removing calluses.
• Do not remove too much of a callus as it may grow back stronger.

7. Usage

• Make sure that the abrasive roller is correctly inserted into the device.
• Press the on/off switch for 1 second to switch on the device. The battery level indicator
flashes 3 times and the device starts in the slower speed setting.
• To switch between the two speed settings, briefly press the 1/2 button.
• You can now remove severely callused skin using the coarse abrasive roller.
• If you wish to remove slightly callused areas or smooth your skin, use the fine callus
attachment.
• Do not use the device for longer than 3 – 4 seconds on one area of the skin.
• The device switches off automatically if the abrasive roller is prevented from moving for
approx. 3 seconds due to too much pressure being applied during use.
• Do not use the portable pedicure device on irritated, sore or broken skin.
• Move the device slowly and evenly over the callus. Make sure you hold the device
vertically at a 90° angle to the callus. To achieve optimum results, it may help to move the
device over the callus in different directions.
Changing the roller:
Remove the roller by pressing and holding the lock button on the side. With your other
hand, push the roller to the right and pull it up and off.

8. Cleaning and maintenance

WARNING
• Unplug the device each time before cleaning.
• Clean the device using only the methods specified. Under no circumstances may
liquid enter the device or the accessories.
• Clean the callus attachment with the cleaning brush. We recommend
that you moisten it beforehand with alcohol to guarantee a hygienic clean.
• Do not clean the device in the dishwasher.
• Do not use any abrasive cleaning products or hard brushes.
Clean the unplugged device once it has cooled down using a soft, slightly damp cloth
and a mild cleaning agent. Then wipe dry with a soft, lint-free cloth.

9. Accessories and replacement parts

Replacement parts and wearing parts are available from the corresponding service address
(according to the service address list). Please state the corresponding order number.
Abrasive roller (coarse, fine)
replacement set
Item number and/or order number
571.07
18