Activating Or Deactivating The Easy-Start Feature - Philips Sonicare HealthyWhite+ Serie Manual De Instrucciones

Activating or deactivating the Easy-start
feature:
Place the handle in the plugged-in charger.
- To activate Easy-start:
Press and hold the power on/off and mode button
for 2 seconds. You hear 2 beeps and the battery level
indicator lights up green to indicate that the Easy-
start feature has been activated.
- To deactivate Easy-start:
Press and hold the power on/off and mode button
for 2 seconds. You hear 1 beep and the battery level
indicator lights up yellow to indicate that the Easy-
start feature has been deactivated.
Note: Each of the first 14 brushings must last at least
1 minute to move through the Easy-start ramp-up cycle
properly.
Note: Use of the Easy-start feature beyond the initial
ramp-up period is not recommended and reduces
the effectiveness of the Philips Sonicare toothbrush
in removing plaque.
Quadpacer
- The Quadpacer is an interval timer that has a
short beep and pause to remind you to brush the
4 sections of your mouth evenly and thoroughly.
Depending on the brushing mode you have
selected, the Quadpacer beeps at different
intervals during the brushing cycle.
ENGLISH
11