Selecting Frequency Groups (Auto Group Setup); Setting The Frequency Group (Auto Group Setup); Selecting Frequencies From The Preset Screen; Setting Frequencies From The Mhz Screen - AKG WMS450 Modo De Empleo

3.8.1 Selecting Frequency
Groups (Auto Group Setup)
Diagram 3: Automatic search for a
clean (interference-free) Frequency
Group.
3.8.2 Selecting Frequencies
from the Preset Screen
Diagram 4: Selecting frequencies
manually.
3.8.3 Setting Frequencies from
the MHz Screen
Diagram 4a: Setting frequencies
directly.
24
3 Setting Up
AUTO
GROUP
No CH
>1<
>NAME<
">AT<"
>NAME<
>SCAN<
">AT3.001<"
FREQ
SAVE >Y< SAVE >N<
>FREQ< >FREQ<
>PRG IR<
IR
3.9.1
"AT 3.0 02"
FREQ
>NAME<
">AT<"
>GROUP<
">3.0<"
>CHANNEL<
">01<"
SAVE >Y<
>FREQ<
>PRG IR<
IR
3.9.1
The MHz screen allows you to set the frequency directly in 25 kHz increments.
"750.000"
FREQ MHz
3 sec.
">750.000<"
MHz
">750.025<"
MHz
SAVE >Y<
>FREQ<
>PRG IR<
IR
3.9.1
>NAME<
">AT<"
>RETRY< >EXIT<
AUTO GROUP
"750.000"
FREQ MHz
SAVE >N<
>FREQ<
Preset
SAVE >N<
>FREQ<
"750.000"
FREQ MHz
Use and to select the number of
required channels between "1" (mini-
mum) for a single-channel system and
"12" (maximum) for a 12-channel system.
Use and to select the desired
Preset. The Preset name is identical to
its country ID code. Selectable Presets
include only those supporting the
selected number of channels.
The receiver will automatically find a
Group with the selected number of
clean frequencies within the selected
Preset and tune to the first clean fre-
quency.
If the receiver finds no clean frequency,
the display will revert to the previous
Preset name.
>RETRY<: start a new search.
SAVE >Y<: save your setting.
SAVE >N<: reject your setting.
Clean frequencies are frequencies
where the receiver finds no RF signal or
an RF signal whose level is lower than
the current threshold setting.
Use and to select the desired
Preset.
Use and to select the desired
Frequency Group.
Use and to select the desired fre-
quency as a Subchannel of the selected
Frequency Group.
SAVE >Y<: save your setting.
SAVE >N<: reject your setting.
To call up the MHz screen, press and
hold the two arrow keys simultaneously
for three seconds.
Press to increase the frequency by
25 kHz or to decrease the frequency
by 25 kHz.
SAVE >Y<: save your setting.
SAVE >N<: reject your setting.
AKG WMS 450 V 1.10