BEAUTURAL 724NA-0001 Manual De Instrucciones página 2

01
IMPORTANT SAFETY INSTRUCTIONS
When using this iron, basic safety precautions should always be followed.
These include:
• READ ALL INSTRUCTIONS BEFORE USE.
• Use the iron only for its intended purpose.
• To protect against a risk of electric shock, do not
immerse the iron in water or other liquids.
• The iron should always be turned to the
minimum setting before plugging or unplugging
from the outlet. Never yank the cord to
disconnect from the outlet; instead grasp the
plug and pull to disconnect.
• Do not allow the cord to touch hot surfaces. Let
the iron cool completely before putting away.
Loop cord loosely around the iron when storing.
• Always disconnect the iron from the electrical
outlet when filling with water or emptying, and
also when not in use.
• Do not operate the iron if the power cord is
damage or if the iron has been dropped or
damaged. To avoid a risk of electric shock, do not
disassemble the iron. Take it to a qualified service
person for examination and repair, or contact our
customer service. Incorrect reassembly can cause
a risk of electric shock when the iron is used.
• Close supervision is necessary for any appliance
being used by or near children. Do not leave the
iron unattended while connected to power or on
an ironing board.
SAVE THESE INSTRUCTIONS
This product is for household use only.
SAFETY FEATURES
POLARIZED PLUG (FOR US ONLY)
This appliance has a polarized plug (one pin is wider than the other). To reduce the risk of electric shock,
this plug is intended to fit into a polarized outlet in only one orientation. If the plug does not fit fully into
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify
the plug in any way.
TAMPER-RESISTANT SCREW
WARNING: This appliance is equipped with a tamper-resistant screw to prevent removal of the outer
cover. To reduce the risk of fire or electrical shock, do not attempt to remove the outer cover. There are no
user-serviceable parts inside. Repairs should be done only by authorized service personnel.
Note: If the power cord is damaged, it should be replaced by qualified personnel.
• Burns can occur from touching hot metal parts,
hot water or steam. Use caution when you turn a
steam iron upside down or use a burst of steam
as there may be hot water in the reservoir.
• Avoid rapid movement of iron to minimize hot
water spillage.
• The iron must not be left unattended while it is
connected to power.
• The plug must be removed from the power outlet
before the water tank is filled with water.
• The iron must be used and rested on a stable
surface.
• When placing the iron on its stand, ensure that the
surface on which the stand is placed is stable.
• The iron is not to be used if it has been dropped, if
there are visible signs of damage or if leakage.
SPECIAL INSTRUCTIONS
• To avoid circuit overload, do not operate
another high-wattage appliance on the same
circuit.
• If an extension cord is absolutely necessary, a
cord with an ampere rating equal to or greater
than the maximum rating of the iron shall be
used. Cords rated for less amperage may
overheat. Care should be taken to arrange the
extension cord so that it cannot be pulled or
tripped over.
02
EN
DE
FR
ES
IT