STAMOS S-MMA-160-I Manual De Instrucciones página 11

EN EN
S-MMA-200-I-MINI:
Overloading / failure = the lamp lights up in case of two cases:
a) Machine failure, it can not be operated.
6
b) Welder exceeded the standard overloading time, it switches
into the emergency mode and next – it turns off. It means, that
the device goes off as a result of temperature and overheating
control. During this process, the warning lamp lights-up on the
front panel. In such case it i is not necessary to pull the plug A
from the socket. In order to cool the device, the fan may still
operate. If the red lamp does not light up, it means that the
device is cooled down to the working temperature and it can
be used again.
LED - Display: Displays the current amperage.
7
S-MMA-160-I:
20 21
Rev. 17.03.2017 Rev. 17.03.2017