Care And Cleaning; Service And Customer Care - Kenwood Triblade System HDP30 Serie Manual De Instrucciones

11 Remove the screen by turning anti-
bl
clockwise
12 Unscrew the collar from the masher
shaft.
optional attachment (not
supplied in pack)
Mini chopper - refer to "service and
customer care" section to order.

care and cleaning

Always switch off and unplug
G
before cleaning.
Don't touch the sharp blades.
G
Some foods, eg carrot, may
G
discolour the plastic. Rubbing with
a cloth dipped in vegetable oil may
help to remove discolouration.
power handle, whisk collar,
chopper cover, masher collar
and shaft
Wipe with a slightly damp cloth,
G
then dry.
Never immerse in water or use
G
abrasives.
Do not dishwash.
G
hand blender shaft/soup
blender
either
Part fill the beaker or a similar
G
container with warm soapy water.
Plug into the power supply, then
insert the hand blender shaft or
soup blender and switch on.
Unplug, then dry
G
or
Wash the blades under running
G
water, then dry thoroughly.
Never immerse in water or
G
allow liquid inside the shaft.
If water does get inside,
drain and allow to dry before
use.
Do not dishwash.
G
whisk, beaker, chopper bowl,
chopper blade, masher
paddle and screens, rubber
ring bases and beaker/bowl
lids
Wash up, then dry.
G
and then lift off.
The following table shows which
items can be washed in the
dishwasher.
item
power handle
blender shaft
soup blender
beaker
beaker lid
beaker rubber ring base
chopper cover
chopper bowl
chopper blade
chopper bowl lid
chopper bowl rubber
ring base
whisk collar
whisk
masher shaft
masher foot
masher paddle
masher collar
masher screens
hint on cleaning the masher
foot/shaft and screens
If food has been allowed to dry
G
onto the masher attachment,
remove the paddle. Soak the
paddle and bottom of the masher
shaft in warm water to soften and
then wash thoroughly.
Never immerse the masher
G
shaft in water or allow liquid
inside the shaft. If water
does get inside, drain and
allow to dry before use.
important - don't allow the
masher collar to get wet.
service and customer
care
If the cord is damaged it must, for
G
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
If you need help with:
using your appliance or
G
servicing or repairs
G
Contact the shop where you
G
bought your appliance.
8
suitable for
dishwashing