TRAPP WM-350 Manual De Instrucciones página 36

Grass cutting
height:
1. Higher
2. Medium
3. Low
3
2
3
1
2
1
To avoid engine overload, select the cutter
 
3
2
edge height according to yard condition.
1
For the types of grass used in Brazil, it is
 
recommended to keep them 2 and 3cm high
from soil. If lawn is excessively high, perform
2 or more cutting with different height
adjustments. This procedure will help to
improve equipment life, thus avoiding a blow
out due to electric engine overload.
Note:
Clean the motor compartment once every
15 hours.
Obs.: To cleaning, remove the 3 screws on the
engine cover at the botton of the lawn
mower.
36
1 2
1 2
1 2 3
Cleaning the Motor Compartment
For WM-350 model (with grass catcher), use
 
clockwise sense to cut your lawn, according
to the illustration below.
3
3
If your lawn is very high, avoid overloading
 
the engine by using only half of cutter cutting
3
2 range, as shown below.
3
1
2
1
3
2
1
Motor
protection
cover
www.trapp.com.br
Screws