Pioneer SVM-1000 Manual De Instrucciones página 24

USING THE EFFECT FUNCTION
Description of the effect
The input sound is given an
effect like that created by a
robot.
A robot-like video is created
by swinging the image up
and down and applying a
mosaic filter.
An expansive sound as if
various sources were
emitting the same sound
pitch.
A video divided into RGB
components is output to the
beat.
Records and repetitively
outputs the beat sound.
Records and repetitively
outputs the beat image.
Records and repetitively
outputs the beat sound in
reverse.
Records and repetitively
outputs the beat video in
reverse.
(*1) When the effect channel display shows [CFA], [CFB], or [MST]/[MASTER], even if the effect monitor is turned ON, if the selected
channel's sound is not output to the master output, the effect sound will not be heard.
(*2) If effect is set to OFF, the effect sound will not be audible when monitoring effects.
(*3) The shortest video effect time value is: For NTSC, 66 ms. For PAL, 80 ms.
(*4) The shortest video effect time value is: For NTSC, 99 ms. For PAL, 119 ms.
(*5) When the visualizer function is switched from ON to OFF, the visualizer's image will be subjected to ROLL in the sampling state.
(*6) When effects are set to OFF, images with effects applied will not be displayed on the video effects monitor.
(*7) Effects will be disabled in all channels if copy-protected contents are input to any channel. In other words, in this case effects will not
function even if non-copy-protected contents are input to the channel to which you wish to apply effects.
Video effect pattern
No. Name Description of video effect pattern
1 ORIGINAL Original image without video effect pattern.
2 INVERSE Inverts brightness.
3 EDGE Creates a border around the image.
4 HUE Changes the color (except black and white).
24
En
Beat button parameter
Sets the effect of the robotic sound
pitch between –100 % and 100 %
Sets the ratio of the mix between the
mosaic size and the original video
between –100 % and 100 %
For the time of 1 BPM beat, a 1/2 to
32/1 time will be set for the interval of
the vibrato of the chorus sound.
For the time of 1 BPM beat, a 1/2 to
32/1 time will be set for the interval in
which the image returns to the
original.
For the time of 1 BPM beat, a 1/8 to
8/1 effect time is be set.
For the time of 1 BPM beat, a 1/8 to
8/1 effect time is be set.
For the time of 1 BPM beat, a 1/8 to
8/1 effect time is be set.
For the time of 1 BPM beat, a 1/8 to
8/1 effect time is be set.
Parameter 1
(TIME/PARAMETER)
Description
Sets the effect of –100 to 100
the robotic sound (%)
pitch.
Sets the ratio of the
mix between the
mosaic size and
the original video.
Sets the interval in 10 to 32 000
which the chorus (ms)
sound is
modulated.
Sets the interval in
which the image
returns to its
original.
Sets effect time. 10 to 4 000
(ms) (*3)
Sets the time in
which the image is
repeated.
Sets effect time. 10 to 4 000
(ms) (*3)
Sets the time in
which the image is
repeated.
Parameter 2
(LEVEL/DEPTH)
Description
The effect is enhanced as the
dial is rotated to the right.
The up and down swinging is
enhanced as the dial is rotated
to the right.
Sets the balance between the
original sound and the chorus
sound.
Sets the balance between the
original video and the effect
video.
Sets the balance between the
original sound and the ROLL
sound.
Sets the balance between the
original video and the effect
video.
Sets the balance between the
original sound and the ROLL
sound.
Sets the balance between the
original video and the effect
video.