Hardware Setup; Mic Setting; System Settings - Pioneer SVM-1000 Manual De Instrucciones

Ocultar thumbs Ver también para SVM-1000:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

HARDWARE SETUP

HARDWARE SETUP
UTILITY
(SET UP)
The hardware setup values are preserved even when power is
turned OFF.
Initiate hardware setup
1
Turn the POWER switch on while pressing the UTILITY (SET
UP) button.
• Continue depressing the UTILITY (SET UP) button while the
logo mark [PIONEER PRO DJ] is displayed.
• The hardware setup screen will be displayed.

MIC SETTING

1
Touch [MIC]
The MIC setting screen will be displayed.
2
Choose settings by touching [] or [].
OUTPUT TO
BOOTH MONITOR
TALK OVER
THRESHOLD LEVEL
TALK OVER LEVEL
3
Touch [SAVE] to save the settings.
The settings will not be implemented unless [SAVE] is
touched.
42
En
HI
10
10
9
9
8
8
7
7
6
6
5
5
4
4
3
3
2
2
1
1
0
0
Set whether or not to output the audio
from the MIC to the booth monitor.
Adjust the sensitivity of talk over.
Adjust the level of talk over.
POWER

SYSTEM SETTINGS

1
Touch [SYSTEM].
The SYSTEM setting screen will be displayed.
2
Choose settings by touching [] or [].
VIDEO SYSTEM
DIGITAL OUT MAX
LEVEL
3
Touch [SAVE] to save the settings.
The settings will not be implemented unless [SAVE] is
touched.
Selects the video signal format. When
used in North America, it should be set to
NTSC (7.5 IRE).
Selects the maximum level of the digital
out circuit.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido