Troubleshooting - Koenic KFH 3161W Manual De Instrucciones

English
Cleaning and care
Warning!
• When cleaning, never use solvents or
abrasive materials, hard brushes, metallic
or sharp objects. Solvents are harmful to
human health and can attack plastic parts,
while abrasive cleaning mechanisms and
tools may scratch the surface(s).
• Never immerse any electrical parts of the
product in water or in other liquids during
cleaning. Never place it under running
water.

Troubleshooting

If there are any problems during operation, please refer to the following table. If problems cannot
be solved as indicated under Solution, please contact your manufacturer.
Problem
Product does not work
Product does not heat
Technical data
Rated Voltage
Rated input power : 1800 W
Protection class
22
IM_ KFH3161W_3161B_180516_V03_HR.indb 22
Possible causes
• Interrupted power supply
• Heating function is not set
• Temperature control knob
set to MIN position
: 220 - 240 V~, 50 Hz
: II
• Warning! Unplug the product and let it cool
down completely before cleaning. Never
immerse electrical parts of the product in
water during cleaning or operation. Carefully
remove dust from the protective guards
with a vacuum cleaner.
• Clean the product's exterior surfaces with
a slightly damp cloth and then dry them
thoroughly.
• Make sure that no water enters the product
interior (for example, through the switches).
• Keep the product in a dry, cool location
which is protected against moisture and
direct sunlight. Keep this product out of the
reach of children.
Solution
• Check the power supply
• Check the position of the
function control knob.
• Check the position of the
temperature control knob and
turn it to the right (MAX) as far
as it will go.
16/5/18 5:03 pm