Technical Data - Hilti DCH 300 Manual De Instrucciones

Disc type
Diamond cutting disc
Diamond cutting disc

4 Technical data

Right of technical changes reserved.
Rated voltage 110 V
Rated power 2,300 W
input
Rated current 22.5 A
input
Mains frequency 50 Hz
Other information about the power tool
Dimensions (L x W x H)
Drive spindle thread
Disc arbor size
Cutting disc
Cutting disc thickness
Weight in accordance with EPTA procedure 01/2003
Protection class
Rated speed under no load
Clamping nut tightening torque
NOTE
The sound pressure and vibration values given in these instructions have been measured in accordance with a
standardized test and may be used to compare one electric tool with another. They may be used for a preliminary
assessment of exposure. The data given represents the main applications of the electric tool. However, if the electric
tool is used for different applications, with different accessories or is poorly maintained, the data may vary. This may
significantly increase exposure over the total working period. An accurate estimation of exposure should also take into
account the times when the tool is switched off, or when it is running but not actually being used for a job. This may
significantly reduce exposure over the total working period. Identify additional safety measures to protect the operator
from the effects of noise and/or vibration, for example: maintaining the tool and the accessories, keeping the hands
warm, organization of work patterns.
Noise information (as perEN 60745‑1):
Typical A-weighted sound power level
Typical A-weighted emission sound pressure level
Uncertainty for the given sound level
Vibration information in accordance with EN 60745
Triaxial vibration values (vibration vector sum)
Cutting, a
h,AG
Uncertainty (K)
Specification
DCH‑D 305 C10
DCH‑D 305 M10
220 V 230 V
2,600 W 2,600 W
12.5 A 12.1 A
50...60 Hz 50...60 Hz
DCH 300
705 mm x 240 mm x 235 mm
M 16 X 1.5
22.2 mm
25.4 mm
∅ Max. 305 mm
Max. 3.5 mm
9.4 kg
Protection class I (grounded) or protection class II
(double insulated). See type identification plate.
Max. 4,900/min
M16 x 1.5: 40...50 Nm
117 dB (A)
106 dB (A)
3 dB (A)
Measured in accordance with EN 60745‑2‑22
5.1 m/s²
1.5 m/s²
Material
Concrete (Economy Line disc)
Masonry (Economy Line disc)
230 V / CH 240 V
2,250 W 2,600 W
10 A 11.7 A
50 Hz 50 Hz
en
21