Operating The Video Recorder - Waeco PerfectView REC 400 Instrucciones De Montaje

Operating the video recorder

Menu item
Car information
Audio recording
Password
Speed unit
Time zone
9 Operating the video recorder
9.1 Making video recordings
I NOTE
To start operating the video recorder, an SD card with at least
4 GB of memory capacity must be inserted first.
The video recorder switches on automatically as soon as volt-
age is supplied. It is not possible to switch it on and off manually.
Starting recordings
➤ Insert the SD card into the slot in the video recorder (fig. 3 5, page 4).
➤ Switch on the ignition.
After approximately 30 seconds, the starting process is complete. The red
LED lamp begins to flash during the starting process and the video recorder
starts recording.
I NOTE
If you switch on playback mode, the video recorder will stop record-
ing.
40
Function
Enter the name of the driver or the driver's licence
number.
Switch the audio recording on or off.
Protect the data by entering a password with a maxi-
mum of 15 digits. You can enter up to 2 user names
and passwords.
After setting the password function, you must enter
the password to play back videos or to make other
settings.
Select the unit for measuring speed:
km/h, miles/h, knots.
Select the time zone.
PerfectView REC 400
EN