Convection air slide valve
Operating lever for the convection air
OPEN
● If you want the room where the stove is installed to
warm quickly, set the lever to „OPEN".
● If you want to store the heat, set the lever to „CLOSED".
20
CLOSED
Fire grate
Operating lever for the fire grate
● With the help of the operating lever the fire grate can
be opened or closed to move the ash from the combus-
tion chamber to the ash pan by pushing the fire grate
back and forth.
● Primary air can only enter the combustion chamber if
the fire grate is set on open position.
Heating
● Only place the quantity of fuel required to achieve the
heating requirement.
For a nominal heating output 6,2 kW:
- max. 1,5 kg billet wood; burning time >45 min
- max. 1,3 kg wood briquettes; burning time >45 min
For max. heat output allowed:
- max. 3 kg billet wood
- max. 3 kg wood briquettes
● Open the combustion chamber door slowly for add-
ing new fuel, as otherwise the combustion gases can
escape.
● Empty the ash pan or combustion chamber in good
time. Otherwise it is possible for the combustion air in-
take to be blocked or for the grate to be damaged.
● Only remove the ash pan to empty it.
● Clean the ash pan compartment regularly after remov-
ing the ash pan to remove any ash that may have been
spilled (e.g. use a vacuum cleaner).
Attention:
Any stove and ash residues must have been left to
cool before being removed.