Postal Scales; Safety Guide - Steinberg SBS-PT-200/50 Manual De Instrucciones

USER'S GUIDE

POSTAL SCALES

EN
INTRODUCTION
Before you use the scale, please read this manual carefully, and keep it stored properly for future use.

SAFETY GUIDE

For good performance and precise measurement, be careful during daily operation and maintenance. Regard
the following instructions:
• Do NOT overload the scale. This will damage the load cell and void the warranty.
• Do NOT leave load on the scale for long. This will decrease the scale's accuracy and shorten the load
cell's life.
• When the scale runs out of power, replace the batteries.
• Do NOT use the scale in thunder or rain.
• Do NOT attempt to repair the scale yourself. Contact your local representative.
• Avoid extreme temperatures. Do not place the unit in direct sunlight or near the air conditioning.
• Make sure the scale is placed on a stable table and is not subject to vibrations.
• Do not use place the scale close to large electrical appliances such as welding machines or large
motors. Do not leave batteries in the device if you do not use it for a long time.
• Avoid vibrations. Do not place your scale near vibrating heavy machinery.
• Avoid places where moisture can lead to condensation. Avoid direct contact with water.
• Do not place the unit close to windows, doors or fans that may cause unstable results due to air
currents.
• Keep your machine clean. Do not store products on the scale when it is not used.
SPECIFICATIONS
Model
Max weight / Accuracy
Min. weight
Display
Units
Power
Functions
Max operation time with batteries
Auto off
DISPLAY
5
4
3
2 1
3133 SBS-PT-200/50 3134 SBS-PT-200/100
200 kg / 50 g 200 kg / 100 g
150 g 300 g
LCD
kg / lb / lb-oz
4 x AA batteries or AC/DC adapter 9V 200 mA
Zero, tare, calibration, clock
77 hours
After 1 minute of inactivity
1. main display
2. STABLE – when the load is stable,
5 STABLE message is displayed
3. negative load indication
4. low battery level indicator – replace the
batteries when this indicator is on
5. units – during normal operation the
display will show one unit
9
Rev. 31.03.2017
EN