COMO AUDIO Solo Manual Del Propietário página 5

Remote Control (install the included AAA batteries):
1. Power = Power
2. "i" = Info: Press repeatedly to see more info about the current
3. Speaker X = Mute, and Snooze when alarm sounds.
4. Up = Navigate up when in the menu. Also acts as seek up when
5. Left arrow = Track back.
6. Down = Navigate down when in menu. Also acts as seek down
7. Play/Pause= Track Play/Pause. Long press brings up menu; Brief
8. Right arrow = Next track; Hold to fast forward through track.
9. 3 Lines = Source icon menu (use up/down/enter to
10. Clock = Alarm menu (use up/down/enter to navigate and
11. Vol +/Vol- = Volume up/down
Display Off: Press any remote key twice except Power and Alarm in standby to toggle
the display off/on. When the display is off, press any key (except Power and Alarm) once
to turn the display on for 7 seconds. Once Solo is turned on, the display will reset to the
previous Backlight Menu setting when placed in standby again.
Set Up Wizard
After turning Solo on for the first time, the Como Audio logo will be displayed, followed
by the Set Up Wizard. Follow the on-screen instructions for each step. Rotate the Menu
knob and push in briefly to select, or use the track, arrow, and Play (which doubles as
"Select") keys on the included remote control.
If your WiFi network requires a password, select "skip WPS" when prompted and use
the keypad to enter your password, then select "OK" to the right. You may find the
remote keys handier for entering a password than using the menu knob.
When prompted, we highly recommend you choose "keep network connected" to
maintain accurate time, receive prompt notification of software updates, and to access
Spotify Connect.
source.
in FM mode. Also shows station list in DAB mode (use
up/down/enter to navigate and select).
when in FM mode. Also shows station list in DAB mode (use
up/down/enter to navigate and select).
press within menu acts as Select; Brief press in Internet radio
mode saves tuned station to Favorites.
navigate/select source).
select); Toggle alarms 1 & 2 on and off in standby.
5
EN