Swingline Stack-and-Shred 100X Manual De Instrucciones página 5

Lights and Icons Explained
Auto
Color of symbol Blue
Power OFF Mode Off
Auto Mode Light
Continuous Jam Boost Mode Light
Reverse Mode Light
Paper Jam Light
Loading Door open Light
Bin full or open Light
Motor Cool Down Required Light
Self cleaning of cutters Light
Sleep Mode Off
Operation
After unpacking the product, pull out the shredder bin (L).
➊
Remove and fit the recyclable paper bag (as per instructions
printed on the bag).
Connect the shredder to power supply.
➋
Ensure the on/off button (A) on the back of the machine is
➌
in the on position.
To start shredding, press the central Auto button (E). This
➍
will illuminate the blue standby symbol on the auto button.
This sets the shredder into auto mode. You are now ready
to shred.
If the shredder is left in auto mode for more than 2 minutes
➎
without being used, it will automatically turn to standby
mode to save power.
The shredder will automatically operate from standby mode
➏
when paper is inserted into the manual entry slot. Opening
either the loading door/lid (I), pull-out bin (L) or pressing
any button will return the product to auto mode.
Automatic Shredding (Fig. 1)
Press the loading door button (H) to open the loading door.
Load up to 100 sheets at a time into the autofeed chamber
(M). Do not fill above the 100 MAX level (see inside front right
of loading bay) this could damage the shredder.
Close the loading door without pressing the loading door
button. The shredder will now start automatically.
Manual Shredding (Fig. 2)
If you only have up to 6 sheets to shred, you can use the
manual entry slot (C), provided the autofeed chamber
is empty.
Paper Jam Bin full / Cool down
bin open /
loading
door open
Red Red Red
Light
Light
Light
Light
Light
Light Flashing
Flashing
Credit Card Shredding (Fig. 3)
100X can shred credit cards. Switch the shredder to auto
mode (see #4 under "Operation"). Insert the credit card
into the opening on top of the manual entry slot (C). ACCO
encourages customers to recycle shredded paper. Please note
that sometimes shredded paper cannot be recycled if mixed
with credit card shards. If recycling, please separate shredded
paper and credit cards
Bin/Loading Door Open
Protection Function (Fig. 4)
As an added precaution, if the bin or loading door is opened
during shredding, the shredder will stop, and the bin full / door
open indicator will glow red
There is an interlock actuator switch (N) located on the left
of the internal loading bay which is designed to prevent the
shredder from operating when the loading door is open. You
must NOT under any circumstances tamper with this interlock
actuator switch. You must NOT insert any object into the
interlock actuator switch other than the interlock actuator
pin on the loading door, as to do so could activate the cutter
blades.
Rare Occasions of Jamming
In the unlikely event of the shredder jamming, the 100X will
automatically reverse and forward the engine three times
to clear a jam. If after this auto jam clearance cycle the shred-
der still has a paper jam, the jam indicator will continue to
illuminate . Try clearing the jam using the reverse (F) and
continuous jam boost (G) buttons. If this is unsuccessful, open
the loading door (I), remove the remaining stack of paper,
then pull the jammed paper free of the cutting mechanism.
Over Heating
If the 100X is used continuously for over 10 minutes the
shredder may overheat and the thermometer symbol will
illuminate . Please allow the shredder to cool down. When
the shredder is ready to be used the thermometer symbol
will no longer be illuminated. If the shredder needs to cool
down while shredding, no action is needed. The shredder will
automatically restart shredding paper once it has cooled down
after periods of continuous use. All you need to do is ensure
paper is loaded into the chamber and the bin is not full when
the machine is cooling down.
Fig. 1 Fig. 2
Autofeed Manual feed
.
Fig. 3 Fig. 4
Credit card Safety device
5