Switching On The Machine; Switching Off The Coffee Machine; Setting The Water Hardness - Electrolux CG 6400 Instrucciones De Uso

Máquina automática para café expresso
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 141
progress bar will be complete and the
display shows «TURN STEAM
KNOB».
0 Turn the steam knob clockwise (Fig. 10)
as far as it will go, to the position
stop the water running out.
The appliance now displays
«TURNING OFF
PLEASE WAIT...» and switches
itself off.
0 Fill the coffee bean container with cof-
fee beans; see „Filling the coffee bean
container", page 38.
Important: To prevent malfunction,
1
never fill this container with ground
coffee, freeze-dried coffee, caramel-
ised beans or anything else that could
damage the appliance.
0 Press the ON/OFF key
trol panel (Fig. 11).
The appliance displays «HEATING
UP...» in the upper line of the display,
and in the lower line a progress bar
with a percentage indication
«
show how far heating has progressed.
When pre-heating is complete, the
appliance displays:
«RINSING...» in the upper line of
the display, and in the lower line a
progress bar with a percentage
indication
«
the appliance performs an automatic
rinse cycle (a little hot water runs out
of the dispenser and is collected in the
drip tray beneath).
The appliance now shows the basic set-
tings; i.e. the upper line of the display
shows the cup size and the lower line
shows the strength of the coffee, e.g.:
«MEDIUM CUP
NORMAL TASTE»
6.5

Switching on the machine

Each time before switching on, make
sure there is water in the water tank
and replenish if necessary. The machine
requires water for the automatic rins-
0 Switch the machine on with the "On/
, to
3
3
on the con-
40%» to
6.6
40%» and
0 Switch the machine off with the "On/
3
6.7
ing cycles that are carried out each
time the appliance is switched on or
off.
Off" key
(Fig. 11).
Immediately after being switched on
the machine runs through a set-up
cycle. The noises occurring are per-
fectly normal.
During the heating-up phase (approx.
120 seconds) the display shows
«HEATING UP..» in the upper line
and in the lower line a progress bar
«
a percentage to show how far pre-
heating has progressed.
When pre-heating is complete, the
appliance displays:
«RINSING...» in the upper line of
the display, and in the lower line a
progress bar with a percentage indica-
tion
«
the appliance performs an automatic
rinse cycle (a little hot water runs out
of the spouts and is collected in the
drip tray beneath).
The coffee machine is now ready to
use. The information shown on the dis-
play depends on the last coffee mode
that was selected.
Switching off the coffee
machine
Off" key
(Fig. 11).
The machine carries out a rinsing cycle
(display indication «RINSING
PLEASE WAIT...») and turns off.
If you will not be using the machine
for a longer period of time, after
switching off the "On/Off" key
should also switch off the main switch
at the back (Fig. 8).

Setting the water hardness

After putting the machine into opera-
tion for the first time, or when using a
different water quality, you should set
g
40%» with
40%», and
, you
39

Publicidad

Tabla de contenido
loading

Tabla de contenido