CONTROLS
The hood is fitted with a control panel with aspiration speed selection control and a light switch to control cooking area lights.
Fan Motor / ON/OFF 1st speed
Fan Motor / ON/OFF 2nd speed
Fan Motor / ON/OFF 3rd speed
POWER BOOST" ON/OFF Function (time-controlled)
Note: the hood will go back to running at the 3th speed, after five minutes.
Operation "ZEN Mode" ON/OFF Function
Note: This function makes it possible to activate an extraction speed with the perfect balance between quietness and
extraction efficiency.
Main light ON/OFF
GREASE/CHARCOAL FILTER ALARM/RESET
At regular intervals, the hood signals the need to perform filter maintenance.
Note: The indicators will only work for 40secs after switching OFF Fan Motor speed.
+
flashing: carry out maintenance of the grease filter.
+
flashing: carry out maintenance of the charcoal filter.
Note: charcoal filter alarm is normally disabled, to enable: switch hood OFF then press and hold
both signals lit for about 3secs to indicate charcoal filter alarm is enabled. Repeat operation to disable (both signals flashes for about
3 secs).
Resetting the filter saturation indicators
Press and hold for almost 3 secs signals while flashing.
22
+
for more than 3 secs,