König Electronic CMP-NWIPCAM22 Manual De Uso página 5

After installing the plug-ins, click the "Mode 1 to view" link in Figure 7 to view the video (video as in Figure 8).
1. Menu Column
There are 2 kinds of menus, one is the main menu, and the other is the submenu. The main menu is at the top
of the interface, including View, Network, Alarm, Advanced, Maintain, the submenu is on the right of the
interface.
Video Display Area
The video display area is dependent on the resolution, the higher the resolution, the larger the display. Double
click the left mouse button in the video display area and it will show the full screen, double click it again and it
will go back to the original size. Double click the right mouse button in the video display area and it will show
the green icon, click the left mouse button and Pan/Tilt will remote according to the arrow signs.
2. Status Display Area
At the upper right corner is the status display area which shows the device's status:
- If not connected, the button is gray
- If connected, the button is green
- If incorrectly connected, the button is yellow
- If there is an alarm, the button is red
Figure 7
Figure 8
5