Nfinity Hub Interface; Compatibility & Orientation - NuVinci Nfinity Serie Manual Del Propietário

3.3 Nfinity Hub Interface Compatibility
TM
6.6 Harmony Hub Interface
TM
& Orientation
Compatibility & Orientation
1. Ensure you have the correct Nfinity Hub
Interface for your NuVinci Optimized CVP.
•
N330 and N330f CVPs have a yellow dot
(A), and are compatible with Nfinity 330
/ Nfinity 330f Hub Interfaces designated
with a light grey interior (B).
•
N360, N380 and N380 CVPs have
SE
a black colored shift driver (C), and are
compatible only with Nfinity 380 Hub
Interfaces designated with a black interior
(D).
2. Use the uninstalled Nfinity Hub Interface (E)
to determine the desired orientation
•
Typical orientation is forward, parallel to
the chain stay or seat stay cable routing.
•
Move the Nfinity Hub Interface along the
dropout to ensure clearance at different
axle positions.
3. With the Nfinity Hub Interface oriented
correctly inside the right dropout, the
installation angle (F) is the indicated
angle of the dropout (20 degrees in this
example).
•
Use the markings on the Nfinity Hub
Interface to determine your approximate
installation angle.
TECHNICAL OWNER MANUAL
N330/N330f CVP
A
N360/N380/N380 CVP
SE
C
Standard Shifter One-Turn Shifter
0°
E
Image can differ from product based on product variant
Nfinity 330/N330f Hub Interface
compatible
B
Nfinity 380/N380
SE
compatible
D
Image can differ from product based on
product variant
0 -> 0°
1 ->15°
2 ->30°
3 ->50°
4 ->75°
5 ->90°
NFINITY ASSEMBLY OF COMPONENTS
Hub Interface

N330/N330f and
!
N360/N380/N380
series CVPs have
different shift driver configurations,
0°
and are compatible only with the
20°
F
appropriate Nfinity Hub Interface.
Do not attempt to fit incorrect
Nfinity Hub Interfaces, as damage
will occur.
EN
SE
11