Cleaning And Maintenance - essentiel b ECSB 1500 MECA Instrucciones De Uso

use
Off
II I
II
Osc
Operating mode selector knob
Plug the heater into a wall socket.
1.
Turn the mode selector knob to a mode of operation:
2.
Mode Description
"Off" The heater switches off
The appliance runs in low heating mode (low temperature)
"I"
The appliance runs in low heating mode and oscillates from
"I Osc"
left to right and vice versa.
"II" The appliance generates a higher temperature
The appliance generates a higher temperature and oscillates
"II Osc"
from left to right and vice versa.
Then turn the thermostat knob clockwise to turn on the heater and set a higher or lower
3.
temperature. The more you turn the knob towards the "MAX" position, the higher the
temperature will be. The indicator light (3) comes on when the heater is in operation.
When you have finished, set both buttons to "Off" and unplug the appliance. Allow it to
4.
cool down sufficiently before storing it in a cool, dry place.
Anti-tilt safety device: if the appliance is tilted, it automatically stops working.
•
Bring it up into vertical position to restart it.
Thermal safety: if the appliance overheats (e.g. if a cloth covers the appliance),
•
it automatically stops working. Uncover it before restarting it.
22
V.2.0
use
Control panel
Off
I
Osc
MAX
Temperature control knob
(thermostat)

cleaning and maintenance

IMPORTANT:
Always unplug the power cord from the power
•
socket and allow the appliance to cool down before
cleaning or maintenance.
Never immerse the appliance, power cord or plug
•
in water or any other liquid.
Never use abrasive cleaning products on this
•
appliance (alcohol, solvent).
Use a slightly damp cloth to wipe the outside of the heater and remove dust and dirt.
•
Use a vacuum cleaner to remove dust from the ventilation holes.
•
Regularly clean the filter on the rear grille of the appliance. To do this, press the tab to
•
remove the rear grille (see diagram below). Remove the filter from its notches. Shake it
above a bin. You can wash it gently with tap water. Allow it to dry completely before placing
it back on the rear grille and reconnecting the appliance.
rear grille
Press the tab to remove
the rear grille
filter
V.2.0
cleaning and maintenance
23