CAUTION! Material damage
Use the original accessories only.
The appliance must not be operated while connected to a PC
●
●
via the USB port.
Never place the appliance on hot surfaces (e.g. hob plates) or
●
●
near heat sources or open fire.
Do not cover the mains adapter to prevent overheating.
●
●
The shaving unit is a precision part. Protect it from damages.
●
●
Do not use any harsh or abrasive cleaning agents.
●
●
Installation of a residual current appliance (FI/RCD) with a rated
●
●
residual operating current of no more than 30 mA is recom-
mended to provide additional protection.
Ask your electrician for advice. The installation should only be
carried out by a qualified electrician.
03. ABOUT THESE INSTRUCTIONS
Before using the appliance for the first time, read the
●
●
Instructions for Use carefully and ensure you comply with the safety
instructions!
The appliance should only be used as described in these instruc-
●
●
tions. The manufacturer or dealer is not liable for damages arising
from any use contrary to the intended purpose.
Keep these instructions for reference.
●
●
If you pass the appliance on to someone else, please include these
●
●
instructions.
24
GB
Warnings in these instructions
If necessary, the following warnings will be used in these operating
instructions:
DANGER! High risk: Failure to observe this warning may result
in injury to life and limb.
WARNING! Moderate risk: Failure to observe this warning may
result in injury or serious material damage.
CAUTION: Low risk: Failure to observe this warning may result
in minor injury or material damage.
NOTE: Circumstances and specifics that must be observed when
handling the appliance.
04. INITIAL OPERATION
Checking the beard trimmer and scope of delivery
1. Remove the beard trimmer from its packaging.
2. Check the delivery for completeness (see fig. A).
3. Check whether the beard trimmer, the individual parts or the acces-
sories show any damages.
4. If the scope of delivery is incomplete or the beard trimmer, the in-
dividual parts or the accessories show any damages, do not use the
beard trimmer. Contact the manufacturer via the service address
stated on the warranty card.
GB
25