Publicidad
2.- INSTALLATION
Earth connection is required.
Ensure voltage is suitable for the heater. Refer to the rating label.
Pass cable through rear of the heater securing with cable grip.
For 3x400V + N~ connection, neutral wire is required.
Using the bracket, the heater can be positioned on the ceiling, wall or floor offering 360º directional
movement.
3.- USING THE HEATER
A) Fan only
Switch with green light: Continuous operation of the ventilation fan.
B) Heating
Switch with red light: Operates the fan and heating working in conjunction with the thermostat.
Control thermostat: Regulates the room temperature switching the fan on / off. Rotate the control
knob to the maximum position. When the room reaches the required temperature gradually rotate the
control knob to the left until the red light goes out. The thermostat will automatically maintain the
room temperature.
Delay thermostat: It operates the fan for a short period when the heating switches off to cool down
the elements.
Safety limiter: It disconnects the heater whenever there is an excess of temperature.
4.- MAINTENANCE
The heater does not require any special maintenance.
Disconnect the heater before cleaning or repair work.
Clean the entrance and exit grills only when the heater is cold.
Do not use abrasive or solvent cleaning products as these may damage the paint.
These heaters are manufactured under an assured quality system using environment friendly procedures.
Please take the heaters to a clean point once their useful life is finished, in order to recycle their
materials in the right way.
5
Publicidad
