Honeywell QuietCare HCM-6009 Manual De Utilización página 9

Digital EasySet Control Operation (Model HCM-6012 & HCM-6012-CST) (Continued)
™
S T E P 4 : S E T H U M I D I T Y
• You can set your desired humidity in 1% increments anywhere from 25% to 65%.
• To set your desired humidity, press the humidity button (
• When the display indicates your desired humidity setting wait 3 seconds.
• After 3 seconds your desired humidity is set and the display will revert back to showing the current
room humidity.
NOTE: If you wish to change your humidity setting or check to see what you set, simply press the humidity
button once and it will show you the set humidity. If you want to
change it, continue to push the button up or down until you have
reached your new desired humidity. Again, after 3 seconds the
display will revert to showing the current room humidity.
• Once you have set your humidity the unit will operate under this
setting until the unit is turned off or your selected humidity is
reached.
• When your desired room humidity has been reached the fan will
shut off and the house icon (
illuminate (Fig. 14). It will stay illuminated until your desired
humidity decreases at which time the fan will turn back on.
NOTE: Your room humidity can often fluctuate. It is normal for
your unit to turn itself on and off throughout the day as it is
monitoring your changing environment.
To go back to continuous mode, turn your unit off and then
back on and select your desired output setting (see step 2).
NOTE: To ensure proper humidity in your home, you should use a
hygrometer (room humidity indictor) such as the E-10 and place across
the room from your humidifier.
(Hygrometer sold separately)
) up or down (Fig. 13).
) on the top of your d isplay will
Fig. 13
Fig. 14
9