Manual Operation - Char-Broil 463346017 Guía De Producto

SmartChef Operating Instructions
The following instructions apply to the main burners only.
The side burner is not controlled by the SmartChef system.

Manual Operation:

Your grill may be operated as a conventional grill. No interaction
with the SmartChef control panel is necessary to operate in this
mode. After lighting your grill, turn your burner valve control
knobs to the desired setting to begin your cook. While in manual
operation, you may still monitor the following features through
your Char-Broil app:
1) Burner flame status – your Char-Broil app will indicate whether
there is a flame present at each burner. At the grill, LED lights
around each knob wilI illuminate when there is flame present.
If there is no flame at all 3 burners for 30 seconds or at a
single burner for 2 minutes, the grill will shutdown to prevent
unburned gas from continuing to flow. ALL knobs must then be
turned to the OFF position and lighting instructions followed in
order to restart grill.
2) Meat Probe temperatures – your Char-Broil app will display
the temperatures of up to two meat probes. Insert probe into
center of meat for most accurate temperature.
3) Grill Temperature – your Char-Broil app will display the current
grill temperature.
4) Tank level – your Char-Broil app will notify you when your tank
level is low.
Controlled Operation:
To preheat and/or cook at a specified temperature:
1) Light grill per lighting instructions.
2) Turn all main burner control knobs to High position.
3) Press Control Start/Stop Button on SmartChef Control Panel
located on grill. Light ring will indicate controlled operation.
4) In the Char-Broil app, set your desired temperature. Your grill
will maintain this temperature throughout the cook.
Temperature may be adjusted within the app at any time.
5) To change to manual operation after a controlled preheat,
press and hold (2 seconds) the Control Start/Stop Button on
the SmartChef Control Panel, then adjust burner control
knobs as desired. If any burner control knob is turned away
from High prior to pressing the Control Start/Stop button, a
notification will alert you to press and hold the button on the
SmartChef Control Panel. If the button is not pushed, the grill
will shutdown to ensure your food is not unintentionally
overcooked.
To follow a cook profile (controlled cook/recipe):
1) Light grill per lighting instructions.
2) Turn all main burner control knobs to High position.
3) Press Control Start/Stop Button on SmartChef Control Panel
located on grill. Light ring will indicate controlled operation.
4) In the Char-Broil app,
a. Choose your desired food.
b. Select your foods attributes, e.g. weight, cut, etc..
c. Tap the "Next" button.
d. Wait until you are notified to add your food to the grill.
Please note, the grill may need to finish the pre-heat cycle
first.
e. When instructed, press the Start button on the grill to start
cooking.
5) To change to manual operation after a controlled cook, press
and hold (2 seconds) the Control Start/Stop Button on the
SmartChef Control Panel, then adjust burner control knobs as
desired.
If any burner control knob is turned away from High prior to
pressing the Control Start/Stop button, a notification will alert you
to press the button on the SmartChef Control Panel.
If the button is not pushed, the grill will shutdown to ensure your
food is not unintentionally overcooked.
In manual or controlled operation, you may turn your grill off in
the following ways:
1) Turn all burner control knobs to the OFF position.
2) Turn SmartChef control panel off using On/Off button, or by
unplugging. ALL knobs should then be returned to the OFF
position. Grill cannot be restarted until ALL knobs have first
been turned to the OFF position, then lighting instructions
followed to light grill. If knobs are not returned to OFF position,
an error notification will be displayed on the app and light ring.
11