Four-Way Cassette Type
EN
B. New built houses and ceilings
a. In the case of new built house, the hook can be
embedded in advance (refer to theA.B mentioned
above). But it should be strong enough to bear the
indoor unit and will not become loose because
of concrete shrinking.
b. After installing the body, please fasten the
installation paper board onto the air conditioner
withbolts(M6 12) to determine in advance the
sizes and positions of the hole opening on ceiling.
Please first guarantee the flatness and horizontal
of ceiling when installing it.
Refer to the A.a mentioned above for others.
c. Refer to the A.c mentioned above for
installation.
d. Remove the installation paper board.
CAUTIONS
After completion of installing the body, the four
bolts(M6 12)must be fastened to the air
conditioner to ensure the body is grounded well.
2.Install the panel
Never put the panel face down on floor or against
the wall, or on bulgy objects.
Never crash or strike it.
(1) Remove the inlet grid.
a. Slide two grid switches toward the middle at the
same time, and then pull them up.
(Refer to chart 8)
b. Draw the grid up to an angle of about 45 , and
remove it. (Refer to chart 9)
(2) Remove the installation covers at the four
corners.
Wrench off the bolts, loose the rope of the
installation covers, and remove them. (chart 10)
7