GE 18 Manual Del Propietario E Instalación página 10

About crisper removal
Not all features are on all models.
Removing the glass cover
Crisper Removal
Unload the bottom shelf before attempting to
remove the storage drawers.
ToRemove:
Lift the (lra_ up slightly while pulling
then/past the stop location.
If the door prevents you from taking out
the drawet5, fit5t try to remove the door
bins. If this does not offer enough
clearance, the refrigerator will need to
be rolled fin'ward tmtil the door opens
enough to slide the (h'awet5 out. In some
cases, when you roll the refl_igerator out,
you will need to move the refl]gerator
to the left or right as you roll it out.
Toremove the glass cover:
Remove the glass, then the fl'ame. \._3_en
replacing the glass, push the front edge
fimfiv into the fl'ame.
O Push up the glass cover at the rear:
Slide the glass cover backwards tmtil the
fl'ont edge coin es out of the fl'am e.
O Rotate the side ot the glass cover up.
Remove the glass cove_:
Removing the frame
Toremove the frame:
I,ifl up the fl'ont oI the fl'ame using
both hands.
@ Slide the fl'ame fin'ward.
O Rotate the side ot the fl'ame up.
O Relnove the fl'alne.
About the additional features.
Not all features are on all models.
She/fSaver
TM
Rack
This slide-out rack holds twelve cans of soda
or two wine/water bottles (lengthwise).
Can be removed fin" cleaning.
To remove, slide the rack out to the stop
position, lift the rack up and past the stop,
and lift out.
/0