Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Turning the TV On and Off
_[
POWER
SOURCE _1
Press the POWER (9 button on the remote control.
m
0
I]
I
You can also use the 0 button on the front of the panet.
q_
,--.,
Plug & Play Feature
When the TV is initiatty powered on, two basic customer settings proceed automaticalty and subsequently:
1.
Press the POWERO
button on the remote control.
The message "Menu language, Channels and Time will be set." is displayed.
Press the ENTER button, then "Select the language of the OSD" menu is
automatically displayed.
2,
Press the ENTER button to enter the language.
Press the A or v buttons to select language, then the ENTER button.
"Select the antennas to memorize." menu is automatically displayed.
3,
Press the
_ or v buttons
to memorize
the channels
of the selected
connection.
Press the ENTER
button
to select
"Start".
>-
If the antenna is connected to ANT 1 (AIR), select "Air" and if it is connected to
ANT 2 (CABLE), select "Cable".
>-
If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select the "Air + Cable".
In Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the * or _
button, then press the ENTER button.
Contact your local cable company to identify the type of cable system that exists in your
particular area.
4.
The TV will begin
memorizing
all of the available
channels.
After
all the available
channels
are stored,
the Auto
program
menu reappears.
Press the ENTER
button
when channel
memorization
is complete.
"Select
the clock
mode."
menu is automatically
displayed.
>
To stop the search before it has finished, press the ENTER button with stop selected.
8.
Press the ENTER button.
Press the A or - buttons to select "Manual" or "Auto", then the ENTER button.
Switches the Daylight Saving Time function on or off.
English 13
Publicidad
