Publicidad
Idiomas disponibles
Idiomas disponibles
Checking the Digital-Signal Strength
Unlike analog channels, which can vary in reception quality from "snowy" to clear, digital (HDTV) channels have eiflaer perfect
receptinn quality nr ynu will nnt receive flaem at all. Sn, unlike anatng channels, you cannot line tune a digital channel. You can,
however, adjust your antenna to imprnve the reception of available digital channels.
1,
2.
Press the MENU button to display the menu.
Press the _ or v buttons to select "Channel", then press the ENTER button.
Press the _- or _ buttons to select "Signal Strength", then press the ENTER button.
If the signal strength meter indicates that the signal is weak, physically adjust
your antenna to increase the signal strength.
Continue to adjust the antenna until you find the best position with the strongest
signal.
Press the EXIT button to exit
LNA (Low Noise Amplifier)
if flaeTV is operating in a weak-signal area, sometimes flae LNA functinn can improve flaereceptinn (a low-noise preamplifier bnnsts flae
incoming signal).
1.
Press the MENU button to display the menu.
Press the _- or _ buttons to select "Channel", then press the ENTER button.
2,
Press the _ or _ buttons to select "LNA", then press the ENTER button.
3,
Press the
_ or _ buttons
to select
"On", then
press the ENTER
button.
Press the EXIT button
to exit.
_-- LNA functions when antenna is set to Air or CaNe. Settings will be stored
separately in each channel. (See "Selecting the antenna." on page 32.)
English 36
Publicidad
