Connecting (Cabling) Each Pvp; Testing Signal And Power Connections; Using The Pvp™ Test Button - Chauvet Professional PVP Serie Manual Del Usuario

Connecting (Cabling) Each PVP™

6. Connecting (Cabling) Each PVP™
Testing Signal and
Power Connections
Rear Panel View
Using the PVP™
Test button
14-
Each PVP™ has 2 power sockets and 2 signal sockets.
· The Power IN and Signal sockets are located on the upper right-hand corner of each
panel.
· The Power OUT and Signal sockets are located on the lower right-hand corner of
each panel.
· The Signal sockets may be used interchangeably.
· Each PVP™ has LED indicator lights.
· Each panel indicates a successful power connection when the Power indicator light
remains red.
· Each panel indicates video signal reception when the Signal LED indicator light blinks
green. This light should be blinking to indicate good reception.
Signal LED indicator
Power In
Power LED indicator
Test Button
Power Out
Signal LED indicator
Signal Connection
Each PVP™ also has a Test button, used to ensure all LEDs are functional. Use the
Test button on each panel to perform a self-test. If self-testing, you must perform the test
individually for each PVP™. You do not need to connect to a signal or use software.
When using the Test button, make sure the PVP™ is not connected to the VIP™
Driver.
To use the Test button, you must connect the power, but do not connect the signal
cables. Press the Test button to toggle through various LED light display configurations.
Underside of Rear View
PVP™ Series User Manual, Rev. 4