Programming The Remote Control; Programming A Code Into A Remote Mode - LG 42PQ20 Manual Del Propietário

APPENDIX

PROGRAMMING THE REMOTE CONTROL

(This feature is not available for all models.)
The provided universal remote control can be programmed to operate most remote-controllable devices.
Note that the remote may not control all models of other brands.

Programming a code into a remote mode

Testing your remote control.
1
To find out whether your remote control can operate other components without programming, turn on a
component such as a STB and press the corresponding mode button (such as a S S T T B B ) on the remote con-
trol, while pointing at the component. Test the P P O O W W E E R R and C C H H
responds correctly. If the component does not operate correctly, the remote control requires programming
to operate the device.
Turn on the component to be programmed, then press the corresponding mode button (such as S S T T B B ) on
2
the remote control. The remote control button of the desired device is illuminated.
Press the M M E E N N U U and M M U U T T E E buttons simultaneously, and the remote control is ready to be programmed with
3
the code.
Enter a code number using the number buttons on the remote control. Programming code numbers for the
4
corresponding component can be found on the following pages. If the code is correct, the device will turn
off.
5
Press the M M E E N N U U button to store the code.
6
Test the remote control functions to see if the component responds correctly. If not, repeat from step 2.
104
buttons to see if the component