Installation Procedure; Supplied Accessories - Kenwood DNX9990HD Guia De Inicio Rapido

Installation Procedure

Supplied accessories

First of all, make sure that all
accessories are supplied with the
unit.
1 ...1
2 ...1
3 ...2
4 ...1
5 ...1
6 ...6
7 ...6
8 ...1
9 ...1
(5 m)
0...1
- ...1
(3 m)
21
EN
Unit
1 To prevent a short circuit, remove
the key from the ignition and
disconnect the
battery.
2 Make the proper input and
output wire connections for each
unit.
3 Connect the speaker wires of the
wiring harness.
4 Connect the wiring harness wires
in the following order;
ground, battery, ignition.
5 Connect the wiring harness
connector to the unit.
6 Install the unit in your car.
7 Reconnect the
battery.
8 Press the <Reset> button.
(P.4)
9 Perform the Initial Setup.
See First Step (P.6).
● Non-Japanese cars
DNX9990HD
terminal of the
terminal of the
Bend the tabs of the
mounting sleeve
with a screwdriver
or similar utensil and
attach it in place.
Continued