Protool QuaDrive Serie Manual De Instrucciones página 11

Technical data – QuaDrive
Cordless drill
Motor voltage
Idling speed*
Torque – screwing into soft/hard material
Adjustable torque**
Chuck clamping range
Max. drill diameter
Screws in spruce
Tool holder in drill spindle
Weight without battery, with CENTROTEC
Accessories
Charger
Mains voltage (input)
Mains frequency
Charging voltage (output)
Rapid charging
Conservation charging current, pulsating
Charging times for:
LiIon 2.6 Ah
NiCd 1.3 Ah
NiMH 2.0 Ah
Permitted charging temperature range
Temperature monitoring
PDC 12-4 TEC battery packs
Voltage
Capacity
Weight
PDC 15-4 TEC battery packs
Voltage
Capacity
Weight
PDC 18-4 TEC battery packs
Voltage
Capacity
Weight
* Speed specifi cations with fully charged battery pack.
** The maximum speed is reduced in the lower torque stages.
The specifi ed illustrations are at the beginning of this operating manual.
1 gear
st
2 gear
nd
3 gear
rd
4 gear
th
1 gear
st
2 gear
nd
3 gear
rd
4 gear
th
in wood
in metal
in stone
max. diameter
80% approx. 45 min.
approx. 25 min.
approx. 50 min.
PDC 12-4 PDC 15-4
TEC TEC
10.8 V 14.4 V
0 – 400/min 0 – 400/min
0 – 850/min 0 – 850/min
0 – 1850/min 0 – 1850/min 0 – 1850/min
0 – 3800/min 0 – 3800/min 0 – 3800/min
25/45 Nm 35/55 Nm
0.75 – 12 Nm 0.75 – 12 Nm 0.75 – 12 Nm
0.6 – 7.5 Nm 0.6 – 7.5 Nm
0.55 – 5 Nm 0.55 – 5 Nm
0.5 – 2.7 Nm 0.5 – 2.7 Nm
1.5 – 13 mm 1.5 – 13 mm
50 mm 50 mm
12 mm 12 mm
10 mm 10 mm
8 mm 8 mm
¼" ¼"
1.6 kg 1.8 kg
BC 3
230 – 240 V ~
50/60 Hz
7.2 – 18 V =
max. 3 A
approx. 0.06 A
NiCd 2.4 Ah
NiMH 3.0 Ah
–5 °C to +45 °C
via NTC resistor
BP 12 LiIon
10.8 V
2.6 Ah
0.450 kg
BP 15 LiIon
14.4 V
2.6 Ah
0.625 kg
BP 18 LiIon
18 V
2.6 Ah
0.715 kg
PDC 18-4
TEC
18 V
0 – 400/min
0 – 850/min
40/60 Nm
0.6 – 7.5 Nm
0.55 – 5 Nm
0.5 – 2.7 Nm
1.5 – 13 mm
50 mm
12 mm
10 mm
10 mm
¼"
1.9 kg
100% approx. 70 min.
approx. 50 min.
approx. 70 min.
GB
11