Before Use - Steinberg SBS-PF-100A1 Manual De Instrucciones

3.2 Direct current characteristics:
3.2.1 Storage battery capacity:
SBS-PF-100A1: 6V 4Ah;
SBS-PF-100A8 / SBS-PF-100A8 foldable: 4V 4Ah;
SBS-PF-A150/20: scale head storage battery: 4V/4Ah, scale platform storage
battery: 4V/4Ah;
SBS-BW-1T/60*80: scale head storage battery: 6V/4Ah, scale platform storage
battery: 4V/4Ah
SBS-PF-600/100: 4V6Ah
3.2.2 Rated voltage: For the models SBS-PF-A150/20 and SBS-BW-1T/60*80:
AC9V.
3.2.3 Backup power nonstop service time: Not shorter than 10 hours after comple-
te charge (for the SBS-PF-A150/20 model: 96 hours, for the SBS-BW-1T/60*80
model: 48 hours; for the SBS-PF-600/100 model: 168 hours).
4. DISPLAY CHARACTERISTICS
Weight window: 5 digits
Unit price window: 5 digits
Total amount window: 6 digits
5. INSTALLATION
EN
Pull out the down-lead of load cell from the pole, and insert the plug into the in-
dicator, then fix the pole and indicator. For platform scale without pole, you just
connect the down-lead of load cell with indicator.

6. BEFORE USE

6.1 Preparation before use.
6.2 Put the scale on a solid and smooth platform. The scale should avoid vibration,
violent air current, direct sunshine and high temperature.
6.3 After connecting with AC power, please check whether the AC indicator lamp
lights up, if not, check relevant parts.
6.4 After power on, the scale will do self-check immediately, during which you can
find whether display and zero position is normal.
6.5 The first thirty minutes after power on is for pre-heating, please don't perform
weighing during that time.
6.6 For the SBS-PF-A150/20 and SBS-BW-1T/60*80 scale models, the connection
between the scale head and the scale platform is wireless. The communication
between the head and the platform is being established right after switching on
the scale head and the scale platform. The scale platform is equipped with three
control lights:
AC – means that the storage battery of the platform is charging (AC power is
connected)
Low Voltage – means that the platform storage battery needs to be charged
SIGNAL – after proper wireless connection between the scale head and the scale
platform this light will be blinking.
18
if the scale display will show „Err24", it means that there is wireless connection
error (the platform is off or the platform storage battery needs to be charged).
7. OPERATION
7.1 Weighing:
After preheating and the weight window displays zero, the scale is ready for
weighing.
Note:
7.1.1 Do not weigh goods over the max capacity. Once overload (weight window
displays OL, and the buzzer gives consecutive sound), please remove the goods
immediately to avoid unexpected damage
7.1.2 Do not weigh goods lighter than min capacity.
7.2 Entering the unit price:
7.2.1 Input the unit price with ten number keys from 0 to 9 before or after
loading.
7.2.2 The interval between one number and the next of the same unit price
should not more than about six seconds (if over six seconds, the system will
clear the previous value automatically)
7.2.3 If the weight window displays negative value (eg. Negative tare weight),
the amount window will display "-------------", which indicates no amount.
7.2.4 If the amount window displays"--------------", it indicates that the accu-
mulation sum is over 9999.99 (EUR).
7.3 Tare:
When weighing bulk goods, put the container on the scale pan, then press key
[TARE] and wait for the weight window displays "000.00", indicating that the scale
is ready for weighing. Put the goods into the container, and the weight window will
display the net weight value.
Note: tare weight + net weight <max capacity.
7.4 Adding:
When a customer buys many goods with different prices, this scale can add
amount one by one and get the total amount.
For example:
Goods A, 15.00kg, EUR5.00/kg; Goods B, 7.00kg, EUR8.00/kg;
Please operate as follows:
1. Put the goods A on the scale pan, the weight window will display "15.00" (kg).
Input the unit price "5.00" (EUR/kg), the amount window will display "75.00"
(EUR);
2. Press key [ADD], the adding indicator lamp will light up to indicate the scale
is under adding mode. The weight window will display "Add" while the unit
window displays "01"and the amount window displays "75.00" (USD).
19
EN