030954-61_UniversalAnleitung_26 Sprachen.qxd:PRINT
MAINTENANCE AND STORAGE
CHANGING GAS CYLINDERS
- The gas cylinder may be changed only in the open, well away from sources of ignition and other persons.
- Shut the cylinder valve and the appliance valve.
- If the appliance was under operation, check whether the flame has extinguished, and allow the
appliance to cool down fully.
- Unscrew the gas regulator and remove it.
- Proceed as described in the section 'Connecting to a gas cylinder'.
CLEANING
Clean the device regularly with a dry cloth. Do not use aggressive cleaning agents, solvents or petroleum
spirit. Do not dip the burner in liquids.
GENERAL MAINTENANCE
- The device does not require any maintenance.
- The nozzle does not require any cleaning.
- Do not make any modifications to the device.
- If the device develops a fault, have it repaired at a competent workshop or contact the manufacturer.
The address is given on the reverse.
STORAGE AND TRANSPORT
- If the burner is not to be used over longer periods, keep it at a safe, cool, dry and well-ventilated place
out of the reach of children.
- Protect the pressurised gas cylinder from sunlight and never expose it to temperatures above 50°C.
- The gas tank must be detached if the burner is not to be used over longer periods, or if it is to be
transported.
- Reusable tanks must always be refilled at authorised companies. Improper refilling can lead to serious
accidents.
RECYCLING
Worn out tools must be recycled at a suitable recycling facility. Do not dispose of in the household waste.
For further information, please contact the responsible authorities. Please dispose of the packaging material
in accordance with the material type as well as the local regulations in force in your area.
SYMBOLS USED IN THIS MANUAL
= Read the
operating
instructions
= Only use outside or
= Caution Hot
9
in well-ventilated
rooms
09.01.2018
= Keep out of
the reach of
children
15:05