Publicidad
Idiomas disponibles
Idiomas disponibles
DUCTLESS CONVERSION
Ductless conversion is intended for applications where an exhaust duct work is not possible to be
installed. When converted, the hood functions as a "purifying" hood rather than an exhaust hood.
Fumes and exhaust from cooking are drawn and filtered by a set of optional Carbon Filters. The air
is then purified and re-circulated back within the home.
We recommend to ALWAYS exhaust air outside of the home by employing existing or installing
new duct work, if possible. The hood is most effective and efficient as an Exhaust unit. Only when
the exhaust option is not possible should you recourse to converting the hood into a "purifying"unit.
When converted to be a "purifying" unit, a Carbon Filters Kit is required. Order according to its Part
number below. The standard Metal Filters are intended to capture residue from cooking and the
optional Carbon Filters help to purify fumes exhausted from cooking for re-circulation.
Carbon Filters (Required)
1. Purchase ductless Carbon Filters Kit as follow:
Hood Model:
Part No.
UXT5230AD*
HCFLTUXT30
UXT5236AD*
HCFLTUXT36
UXT5430AD*
HCFLTUXT30
UXT5436AD*
HCFLTUXT36
2. The ductless conversion housing must be
installed prior to installation of the range
hood.
3. Remove the diffuser panels on the hood.
4. Clip carbon filter onto bracket of
diffuser panels.
5. Re-install diffuser panels.
6. Carbon Filters must be replaced after
every 120 hours of use (or approximately
every 2 to 3 months based on the average
of 1-2hrs. of daily cooking time).
7. Refer installation manual provided with
ductless carbon filters kit.
INSTALLATION
Filters in pkg.
2
3
2
3
9
Publicidad
