Bosch MUZ5CC2 Instrucciones De Uso página 14

en Operation
Setting 3 (2): boiled potatoes, carrots and
eggs, cucumbers, bananas, strawberries,
melons.
Setting 5 (3): raw potatoes and carrots, soft
sausage (e.g. mortadella), sliced cheese,
hard cheese, peppers, tomatoes, onions,
apples.
Assembling the cube cutter insert
X Fig. D
■ Insert the cutting grid in the base holder.
Observe the recesses!
■ Insert the cutter disc into the base
holder.
■ Press up the 3 catches until they lock
into place.
Working with the cube cutter
X Fig. E
■ Press Release button and move
the swivel arm to position 2.
■ Insert bowl:
– Tilt the bowl forwards and then set
it down.
– Turn anti-clockwise until it locks into
place.
■ Press Release button and move
the swivel arm to position 1.
■ Remove the protective drive cover.
■ Place the casing on the drive and turn
clockwise as far as possible.
■ Insert the drive shaft.
Warning!
The opening in the drive shaft (Fig. E-7)
must not be blocked with food remnants,
etc.
■ Insert the cube cutter insert. The arrow
on the cube cutter insert and the arrow
on the casing must line up!
■ Attach the lid (note the marking,
Fig. E-9) and turn clockwise as far as
possible.
■ Insert the mains plug.
■ Turn the rotary switch to the recom-
mended setting.
■ Place the food to be diced in the feeding
tube. If required, press down on the
pusher with light pressure. If necessary,
chop food up beforehand.
14
Warning!
Empty the bowl in good time:
– after processing max. 1500 g,
– before the cubes have reached the
lower edge of the cube cutter.
Information:
– To remove/empty the bowl, it is not
necessary to remove the cube cutter
from the appliance. Simply press
Release button and move the swivel
arm to position 2.
– While processing different foods accord-
ing to a recipe, occasional cleaning of
the cube cutter is not necessary.
After using the appliance
■ Set the rotary switch to 0/off.
■ Pull out the mains plug.
■ Rotate the lid anticlockwise and remove.
■ Take the cube cutter insert out of the
casing.
■ Take out the drive shaft.
■ Rotate the casing anticlockwise and
remove.
■ Remove food remnants from the cutting
grid using the cutting grid cleaner.
Disassembling the cube cutter insert
X Fig. F
■ Press the 3 catches outwards and
remove the cutter disc.
■ Take the cutting grid out of the base
holder.
With some models:
Continuous-feed shredder insert
Reversible slicing disc –
thick/thin
For slicing fruit and vegetables.
Process on setting 5 (3).
Marking on the reversible slicing disc:
"1" for the thick cutting side
"3" for the thin cutting side
Warning!
The reversible slicing disc is not suitable for
slicing hard cheese, bread, rolls or choco-
late. Slice boiled, waxy potatoes only when
they are cold.