Attaching The Car Seat Onto The Base - Foppapedretti X-BASE TALENT Instrucciones De Montaje

ATTACHING THE CAR SEAT ONTO THE BASE

Step 1.
Place the car seat onto the ISOFIX base in a rear-facing position.
Step 2.
Press the car seat downwards, attaching the two metal brackets to the
base. You will hear a click when it has attached.
IMPORTANT: After having attached the seat to the base, lift up the car seat to
make sure that it has clicked into place correctly. Check that the indicators have
moved from red to green.
Step 3.
Push the car seat, which is attached to the base, against the backrest
of the passenger seat so that the anti-rebound bar adheres perfectly to the
backrest.
Step 4.
Press the red button to adjust the support leg and lower it down so that
it correctly touches the vehicle floor. The control device located at the base of
the support leg should move from red to green, indicating that the leg has been
placed correctly. Check that the support leg is positioned and adjusted correctly.
Make sure that the support leg does not raise the base from the surface of the
ENGLISH
• •
32