Steren CCTV-968 Manual De Instrucciones página 53

3. Preset. Allows you to set the camera up to 128 positions. Press "Opc.". Use the direction
buttons to lock a position. Assign an ID between 1 and 128, then press "Opc.". If you want to
delete any preset press 'Delete'. Press "Exit" to return to the previous menu.
4. Cruise. Allows you to schedule up to 16 paths or surveillance tracks.
-Enter the track number (1 to 16) in the field "Cruise Path Number".
-Select the Cruise Point and the corresponding Preset.
-In the field "Dwell Time" set the time that takes the camera to move from one point to another
and waiting time. Be sure to secure one sufficient time for the track to complete.
-Adjust the speed with which the camera will move. The range can vary from 1 to 16.
-Finally, enter the point to which applies the changes in the 'Cruise Point' field. Press "Add"
to save the changes.
-Repeat the above steps to add other tracks. To delete a point, enter it in the 'Point' field and
click on 'Delete'.
** The "Cruise" function depends on the connected camera.
5. To use a preset or monitoring path enter the
PTZ camera menu and click on "Track". Enter the
point desired in the 'Preset' or 'Browse' fields and
press "Start" to run the schedule.
If you want to set the same settings to one or all
channels, use the tab on the bottom and press
'Copy to'. At the end select "Ok" to save your
changes.
22 22
8. MENU